Telecommunications
Fiber Optical ADSS Cable Accessories
CROP Advantage
11 Years Production Experience
OEM & ODM Service
Free Sample Supply
On Time Delivery
QC
Telecommunication ADSS cable accessories
Index
What is ADSS cable ?
ADSS (All-Dielectric Self-Supporting) cable is ideal for installation in distribution as well as transmission environments, even when live-line installations are required.
As its name indicates, there is no support or messenger wire required, so installation is achieved in a single pass, making ADSS an economical and simple means of
achieving a fiber optic network.
Telecommunicate ADSS cable accessories classification
1.Preformed Tension Clamp For ADSS Cable
2.Preformed Suspension Clamp for ADSS Cable
3.Anchoring clamp for round ADSS cable
4.Anchoring clamp for Fig-8 ADSS cable
5.Suspension clamp for ADSS cables
6.Stainless steel band and buckle
7.Horse clamp
8.Bracket
1.Preformed Tension Clamp For ADSS Cable
Preformed tension Clamps are designed to connect continue pole (tower) and Terminal pole(tower), tensile pole or line angles above 25° Pole (tower). The special
specification: one unit per Terminal pole (tower), two units per tensile pole (tower), two units per continue pole (tower).Armor rods can provide protection and cushioning
to the ADSS cables. The special design of Preformed rods makes ensure that Tension Clamps can’t cause undue stress to the ADSS cables, so as to ensure the normal
lifetime of cables system.You can select the Specification Model corresponding to the appropriate cable diameter range, maximum allowable tension (MAT) or Span Length
from Data Sheet.
1.1 Low Tensile force Tension Clamp for ADSS Cable
The tension clamp is single preformed rods structure, simple and reliable ,convenient and quick installation, It is specially designed for short span length low tensile
force ADSS cables.
Technical Data:
Grip Force：3KN
Recommended Span Length：≤50m
DN(1.5Kn-5Kn):1PC, YK-OK-01:1PC,TC-005:1PC.
| Type | Work suspension load kN | MBL KN | Diameter clamped cable mm | Reinforced rod | L mm |
|---|---|---|---|---|---|
| DN-1.5(3) | 1.5 | 3 | 4-9 | No | 300-360 |
| DN-3(5) | 3 | 5 | 4-9 | No | 300-360 |
Technical Data:
Grip Force: 15KN
Recommended Span Length：≤100m
DN(6KN-15KN):1PC,TC-01:1PC,PRT-7-1:1PC,CK-7-1A:1PC,YKN-02:1PC.
| Type | Work suspension load kN | MBL KN | Diameter clamped cable mm | Reinforced rod | L mm |
|---|---|---|---|---|---|
| DN-6(10) | 6 | 10 | 9-20.9 | No | 500-800 |
| DN-9(15) | 9 | 15 | 9-20.9 | No | 600-1000 |
1.2 Middle and Low Tensile Force Tension Clamp for ADSS Cable
Technical Data:
Grip Force: 7-25KN
Recommended Span Length：≤200m
DNR:1unit,TC-03:1PC,PRT-7-1:1PC,CK-7-1A:1PC,YKN-02:1PC.
| Type | Work suspension load kN | Length cable span m | Diameter clamped cable mm | Reinforced rod | L mm |
|---|---|---|---|---|---|
| DNR-7(12) | 7 | 12 | 9.0-20.9 | Yes | 800-1000 |
| DNR-10(17) | 10 | 17 | 9.0-20.9 | Yes | 800-1200 |
| DNR-15(25) | 15 | 25 | 9.0-20.9 | Yes | 800-1200 |
Tension Clamp accembly
2. Preformed Suspension Clamp for ADSS Cable
The Preformed Suspension Clamp is the connecting hardware of ADSS cable which hanging in transmission line pole (tower). It can reduce static stress at the support point, improve cable ant-vibration ability, and cushioned against the dynamic stress of Aeolian vibration. as well as ensure that the cable bending will not exceed the permissible values, make the cable does not produce bending stress, so that the fiber optic don’t produce extra loss in the cables.
Structure and Material:
Thimble—Hot dip galvanized steel. Thimble is designed to bear gravity and to hang on the pole.
Armor Rods—– Galvanized steel wire. Armor Rods increase friction with a layer of particle emery inside to cables. Rods are assembled into four subsets in workshop which reduce misalignment errors and speeds installation. The ends are bent outward to provide stress relief at the critical cable departure areas.
Accessories: B16:1PC, TP-01:1PC, AX:1PC.
2.1 Short Span Tangential Suspension Clamp for ADSS Cable
Technical Data:
Recommended Span Length: ≤50m
YKP-02:1pc, TP-01:1PC, SG-50:1PC.
| Type | Work suspension load kN | Length of cable span m | Diameter clamped cable mm | Reinforced rod | L mm |
|---|---|---|---|---|---|
| SG-50 | 2 | ＜50 | 6.6-20.9 | No | 500 |
2.2 Middle Short Span Tangential Suspension Clamp For ADSS Cable (With Armor Rods)
Technical Data:
Work suspension load:＜10kN
Recommended Span Length: ≤110m
YKP-02:1pc, TP-01:1PC, SGR:1Unit.
| Type | Work suspension load kN | Length of cable span m | Diameter clamped cable mm | Reinforced rod | L mm |
|---|---|---|---|---|---|
| SGR-110 | ＜10 | ＜110 | 6.6-20.9 | Yes | 800-1200 |
2.3 Middle Short Span Tangential Suspension Clamp For ADSS Cable (With Armor Rods)
Technical Data:
Work suspension load: ＜10kN
Recommended Span Length: ≤500m
YKP-02:1pc, TP-03:1PC, CK-7-1A:1PC, SGR:1Unit.
| Type | Work suspension load kN | Length of cable span m | Diameter clamped cable mm | Reinforced rod | L mm |
|---|---|---|---|---|---|
| SGR-500 | ＜10 | ＜500 | 10-20.9 | Yes | 800-1200 |
2.3 Big Span Tangential Suspension Clamp For ADSS Cable
Technical Data:
Work suspension load: ＜70kN
Recommended Span Length: ≤500m
KP-16：1PC,CK-12-1A:1pc, PRT-7-1：1PC,TS-07:1PC, SGR:1Unit.
| Type | Work suspension load kN | Length of cable span m | Diameter clamped cable mm | Reinforced rod | L mm |
|---|---|---|---|---|---|
| SGR-700 | ＜70 | ＜500 | 14-20.9 | Yes | 800-1200 |
3.Anchoring clamp for round ADSS cable
PRODUCT OVERVIEW:
These clamps are designed for dead-ending aerial ADSS cables on access networks. Different capacities are available to adapt to the cable Ø.These anchoring clamps are made of an opened Aluminum body, a pair of plastic wedges,and a flexible bail equipped with an insulating thimble. The bail can be locked onto the clamp body once passed through the pole bracket and re-opened by hand at any time,when the clamp is not under full load. All parts are secured together to prevent any loss during installation.
APPLICATION:
These clamps will be used as cable dead-end at end poles (using one clamp).Two clamps can be installed as double dead-end in the following cases :
1.at jointing poles
2.at intermediate angle poles when the cable route deviates by more than 20°.
3.at intermediate poles when the two spans are different in lengths.
4.at intermediate poles on hilly landscapes.
FEATURES:
1.Dead-ending of 8 to 18 mm ADSS cables
2.Minimum breaking load of 10 Kn
3.Installation on any pole hardware fitting :brackets, cross-arms or eye bolt with a min eye Ø of 15 mm
4.All plastic parts are UV resistant and tested in conditions equivalent to min 25 years of service in tropical environment.
| Models | PA-1000-* | PA-1500-* | PA-2000-* |
|---|---|---|---|
| Cable range (mm2) | 25-35 | 50-70 | 70-95 |
| Cable diameter(mm) | 8~11 | 11~14 | 14~18 |
| Core No. | 1 | 1 | 1 |
| MBL (daN) | 1000 | 1500 | 2200 |
